REFLECTIVE TAPE STORE
"FLEXIBLE" HIGH INTENSITY TYPE III REFLECTIVE TAPE IN 2" ROLLS (SOLAS ALTERNATIVE)
ITEMS SHIPPED "FAST" BY PRIORITY MAIL OR UPS WITHIN THE U.S.
"Flexible" 2 Inch High Intensity Reflective Tape in White, Yellow & Orange. Nikkalite ASTM D4956 Type III. 4 times brighter than standard engineer grade reflective tape. Great for applications where a flexible, stretchable, reboundable tape with a high tack adhesive is needed. Adheres well to plastics and flexible surfaces such as kayaks, road barrels, etc.. An affordable alternative to SOLAS tape.
EASY TO APPLY. JUST PEEL THE BACKING OFF AND APPLY TO A CLEAN SURFACE. We also carry this tape in 1" rolls, 4" rolls, and 6" rolls.
Feel free to contact us at email@example.com or call (850) 934-3157 for assistance. To request a quote you can email us or our FAX the request to (888) 789-5422.
There are more pictures of this product at the bottom of this page.
Click here for a "Spec Sheet" on this product.
This is a 2" flexible version of our Nikkalite High Intensity Type III reflective tape. It is available in White, Yellow and Orange. It is very tough, bright and will stretch to conform to difficult surfaces. It has a high tack adhesive. While this tape is not a SOLAS certified tape it is going to be very similar in look and performance to the honey comb pattern SOLAS tapes you see on life boats and other offshore applications. Because it is flexible and stretchable it will conform better to complex curves than other reflective tapes. Our 2" x 30' and 2" x 150' rolls of Flexible High Intensity Type III reflective tape can be used to mark everything that our standard high intensity tape will mark as well as objects that are flexible and/or contain complex curves. For example, standard high intensity tape will not conform to a motorcycle helmet whereas the flexible high intensity tape will.
This is the same type material found on brighter road signs, road barrels, traffic cones and barricades. Our Flexible High Intensity Type III tape is 4 times brighter than standard engineer grade tape and exceeds all federal and state requirements for type 3 tape. Glass beads are encapsulated in a honey comb design thus creating a much brighter retro reflective tape. It is easy to handle and resists chipping and cracking. On this page we sell 2" rolls of tape. For other widths click on the links below or to the left.
To install simply peel the backing off the tape and apply to a clean surface. Press on with a clean cloth or squeegee. To enhance the stretchability of the tape simply heat with a hair dryer while applying.
We stock the 30 foot and 150 foot rolls of Flexible High Intensity Tape in the following colors:
White, Yellow and Orange.
We also carry this tape in 1" rolls, 4" rolls, and 6" rolls.
If you wish to order reflective tape rolls with a check or money order you can send payment along with a description of what you are ordering to
About our products - Reflective tape strips light up at night when light reflects off of them. Our High Intensity grade reflective tape utilizes an encapsulated glass bead technology to reflect light. Glass beads are concentrated in a honey comb design. It is the same material you will see on brighter street signs and reflective road barrels. It is manufactured by Nikkalite Industries and has a 10 year outdoor rating. Reflective tape strips are also ideal for marking bollards, poles, light bases in parking lots / lot and parking garages / garage , golf course pins and flags, street signs, automatic gates and more. We carry 1" and 2" inch widths in red white and yellow and can do custom widths and lengths.