REFLECTIVE TAPE STORE
12" PREFORMED THERMOPLASTIC ROLLS FOR STOP BARS AND CROSSWALKS

ITEMS SHIPPED "FAST" VIA UPS WITHIN THE U.S.

Our 12" Heavy Duty Preformed Thermoplastic Pavement Marking ROLLS come in 30 foot lengths. They are extremely durable, and can be applied by anyone using a broom and a simple heat torch. Designed to be used as long term striping on highways and interstates, parking lots, bike paths, etc... Great for crosswalks, stop pads, hazard areas, etc.. Available in white. Other colors are available by the case. Click here to order rolls in 4" - 24" widths by the CASE.
creditcardlogo
HAVE A QUESTION OR NEED A SAMPLE?
CLICK TO EMAIL STEVE COLE
e-mail or call me at 850-934-3157 9am-9pm
HOME
PREFORMED THERMOPLASTIC ROLLS (BY THE ROLL)
PREFORMED THERMOPLASTIC ROLLS (BY THE CASE)
THERMOPLASTIC HANDICAP LOGOS & ROLLS
PREFORMED THERMOPLASTIC 12" WHITE ROLLS FOR STOP BARS & CROSSWALKS
CONFORMING FOIL BACKED PAVEMENT MARKING TAPE
REFLECTIVE GLASS BEADS FOR PAINT & THERMOPLASTIC
ENGINEER GRADE REFLECTIVE TAPES
DOT APPROVED "DAYBRIGHT" VALUE PRICED CONSPICUITY TAPE
SCHOOL BUS CONSPICUITY TAPE
REFLECTIVE ROAD MARKERS
REFLECTIVE TRAFFIC CONE COLLARS
REFLECTIVE FABRIC & TAPE
NON SKID ANTI SLIP TAPE
CUSTOM ORDERS
RELATED SITES
Asphalt Sealcoating Direct - Equipment for Small Contractors

parking lot striping tape
CLICK HERE FOR INSTALLATION PHOTOS
CLICK HERE FOR AN INSTALLATION VIDEO

Our 12" preformed thermoplastic pavement marking tape ROLLS are designed to stripe stop bars, crosswalks and any other area where heavy duty, high visibility delineation is needed. It is great for quickly creating crosswalks, stop pads, hazard areas, arrows and other markings. For crosswalks you use two single 12" lines spaced apart and for stop bars you use two side by side to form a 24" bar. For arrows you use an exacto knife to score the material and create the parts of the arrow. This product will last 5 times longer than paint, is reflective and best of all, you can put it down yourself. No contractor required.

Our tape is simple to install using a broom and a propane torch. No contractor required. It is 90 mils thick and has a durable, reflective, non skid surface. Since this is a melt on type product the tape will conform and bond to moderately rough surfaces or smooth surfaces and is incredibly tough. When properly installed you will get years of service out of this material. It can handle any type of traffic.

To apply simply broom or blow off the dry, oil free area to be striped, heat the area with a propane torch, lay out the stripe and then slowly heat the surface of the stripe until a permanent bond is created. Once the material has cooled the area is ready for traffic. Please refer to the link above for complete instructions. It is important for this product to be installed properly.

Note-for cement or concrete surfaces such as warehouse floors you will need to use "thermobond" which can be ordered at the bottom of this page. It creates an excellent bond with cement or concrete and substantially reduces the amount of heat necessary to install the thermoplastic striping. Thermobond can also be used on on asphalt to reduce application time.

To use thermobond you mix an amount that you can use within 15 minutes and apply to either the back of the stripe, the pavement surface, or to both if you wish. Then lay the stripe down and heat the top of the stripe with a torch until the material conforms to the surface. (note that it does not take a tremendous amount of heat to get the material to conform) The thermobond will set in about 15 minutes and at that point the stripes are ready for traffic.

On this page we sell this tape by the roll in WHITE.

Click here to order 4" rolls. (less than a case)

Click here to order rolls in 4" - 24" widths by the CASE.

Click here to order HANDICAP logos.


12" ROLLS FOR STOP BARS & CROSSWALKS


One Roll of 12" X 30' WHITE Preformed Thermoplastic Tape

($159.99 per roll plus shipping) click below:


(to order more than one roll click "add to order",change the #, and click update)
THERMOBOND

parking lot striping tape

For bonding thermoplastic to cement surfaces use "thermobond". It is a heat activated adhesive specially designed for thermoplastic striping. Simply mix the amount you need, roll onto the ground or back of the stripe, lay on the ground and heat just enough to get the material to conform to the surface. The heat will activate the adhesive and create an excellent bond. Detailed instructions will be included with the thermobond. One gallon will adhere approximately 720 linear feet of 4" striping. Note - Thermobond may also be used on asphalt for superior bonding but is not necessary.)


One Gallon of Thermobond Two Part Heat Activated Adhesive

($100.00 per gallon which includes shipping. This item will ship from the manufacturer and may arrive separately from your thermoplastic rolls.) click below:


(to order more than one gallon click "add to order",change the #, and click update)



If you wish to order with a check or money order you can send payment along with a description of what you are ordering to

Cole Farms Inc.
1610 Guam Lane
Gulf Breeze, Fl 32563


parking lot striping tape

About our products - We carry the finest quality industrial/commercial reflective tapes, reflective iron on tape, non skid tapes and pavement marking tapes available. Our parking lot striping tapes are manufactured using the highest quality raw materials that result in a durable application that is resistant to heavy traffic, water and grease.

We ship UPS for most orders. Delivery time is approximately 3-5 days on most standard orders.

Return and Order Cancellation policy - 12" preformed thermoplastic parking lot striping / pavement marking tape orders can be cancelled until they are shipped out. After that we do not accept returns unless there is a defect in the product that cannot be remedied. If an item is found to be defective it can be returned for a full refund of the purchase price.

Privacy Policy - all customer information is kept in strict confidence. We do not release any information on any of our customers to anyone without that customers consent.