THE REFLECTIVE TAPE STORE
CHEVRON STRIPING - "TYPE I ENGINEER GRADE" - 7 YEAR OUTDOOR RATING.

ITEMS SHIPPED "FAST" VIA FEDEX OR UPS WITHIN THE U.S.

Flexible Engineer Grade reflective tape for Chevron Striping. Designed for emergency vehicles. Easy to apply. Just peel off the backing and apply to a clean surface.
creditcardlogo
CLICK TO EMAIL STEVE COLE e-mail or call me at 850-934-3157 9am-9pm
HOME
CHEVRON STRIPING - TYPE I ENGINEER GRADE (BRIGHT)
CHEVRON STRIPING - TYPE III HIGH INTENSITY GRADE (BRIGHTER)
CHEVRON STRIPING - TYPE V PRISMATIC GRADE (EXTREMELY BRIGHT)
CHEVRON STRIPING - TYPE VIII PRISMATIC GRADE (BRIGHTEST)
ENGINEER GRADE REFLECTIVE TAPES
HIGH INTENSITY TYPE III REFLECTIVE TAPE
ULTRA-BRIGHT REFLEXITE V92 PRISMATIC REFLECTIVE TAPE
SOLAS MARINE REFLECTIVE TAPE
SCHOOL BUS REFLECTIVE TAPE
REFLECTIVE PAVEMENT MARKING TAPE
REFLECTIVE TRAFFIC CONE COLLARS
REFLECTIVE FABRIC & TAPE
NON SKID ANTI SLIP TAPE
CUSTOM ORDERS
AUTOMOBILE STRIPE KITS
rail car tape


NFPA 1901 states that firetrucks and emergency vehicles shall have alternating yellow and red chevron striping applied to 50% of the rear of the vehicle. We carry reflective chevron striping in three types or grades of tape. Type 1 (bright), Type 3 (brighter) and Type 5 (brightest). All three are compliant with the NFPA 1901 standard. On this page we carry 1" and 6" rolls of type 1 tape.

The 1" rolls are for treadplate striping. For treadplate applications we recommend punching the material into 3/4" squares or circles and applying it in the flat area between the diamonds. Punches can be purchased at Hobby Lobby, Michaels or any hobby store for about $10.

The 6" material is for the downward slanting 45 degree chevrons. The stripes must alternate from red to yellow.

Engineer grade type 1 material meets the minimum standards for chevron striping established by the NFPA. It is also the most flexible and least expensive of the reflective films. It will stretch and conform better than any other reflective tape. Heat from a hair dryer or heat gun enhances this characteristic.

Click here to view the NFPA 1901 Chevron Striping Requirement for 2009.

Click here to view instructions on applying reflective material to "treadplate".


We carry the following Type 1 Engineer Grade Chevron Striping. For Other grades of Chevron Striping click on the links to the left.

Solid Yellow or Red 1 x 150' Reflective Rolls - $49.99 per roll (Punch into 3/4" squares or circles & apply to treadplate - see link above)
Solid Yellow or Red 6" x 150' Reflective Rolls - $169.99 per roll


1" X 150' ROLL - Reflective RED Tape

($49.99 PLUS SHIPPING) click below:


6" X 150' ROLL - Reflective RED Tape

($169.99 PLUS SHIPPING) click below:



1" X 150' ROLL - Reflective YELLOW Tape

($49.99 PLUS SHIPPING) click below:


6" X 150' ROLL - Reflective YELLOW Tape

($169.99 PLUS SHIPPING) click below:


If you wish to order with a check or money order you can send payment along with a description of what you are ordering to

Cole Farms Inc.
1610 Guam Lane
Gulf Breeze, Fl 32563


FOR CUSTOM ORDERS PLEASE CONTACT ME BY E-MAIL OR CALL STEVE COLE AT
850-934-3157 AND I CAN QUOTE ANYTHING YOU NEED.