2" WIDE REFLECTIVE DOT C2 TAPE (7/11 PATTERN)
"V92 DAYBRIGHT" DOT APPROVED CONSPICUITY TAPE IN 2" x 30' or 150' ROLLS (7" WHITE / 11" RED PATTERN)

ITEMS SHIPPED "FAST" VIA PRIORITY MAIL or UPS WITHIN THE U.S.
dot conspicuity tape
2" Wide Rolls of Reflexite "V92 Daybright" Conspicuity Tape for Semi Trailers in the popular 7"/11" pattern. Far superior to other DOT Conspicuity Tapes. This 5-7 year rated
product exceeds all State and Federal NHTSA & DOT requirements. Easy to apply. Just peel off the backing and apply to a clean surface.
creditcardlogo
CLICK TO EMAIL STEVE COLE e-mail or call me at 850-934-3157 9am-9pm
HOME
MAIN DOT TAPE PAGE
(CLICK TO SEE ALL OF OUR DOT TAPES)
ENGINEER GRADE REFLECTIVE STRIPING
HIGH INTENSITY TYPE III REFLECTIVE TAPE
ULTRA-BRIGHT REFLEXITE V92 PRISMATIC REFLECTIVE TAPE
YELLOW SCHOOL BUS CONSPICUITY TAPE
SOLAS MARINE REFLECTIVE TAPE
FRA RAIL CAR REFLECTIVE TAPE
REFLECTIVE PAVEMENT MARKING TAPE
REFLECTIVE TRAFFIC CONE COLLARS
REFLECTIVE FABRIC & TAPE
NON SKID ANTI SLIP TAPE
NHTSA & TRANSPORT CANADA TRAILER MARKING POSTER
2
More photos at bottom of page.


United States and Canadian DOT regulations require that tractor trailers exceeding 10,000 lbs. GVWR have alternating red and white DOT approved 2" wide reflective conspicuity tape applied along at least 50% of their lengths (can be segmented) and entirely across their back ends. Solid Silver/White conspicuity tape is required to mark the upper rear corners of trailers by the placement of two 2" x 12" segments together to form an inverted "L" in each corner. Our 7" White / 11" Red alternating conspicuity tape exceeds all federal and state DOT requirements. It is a bright prismatic tape with a reflectivity rating of around 500 candlepower. It is easy to handle, flexible enough to go around corners, and resists chipping and cracking. For more information on DOT requirements you can click on the link to the left hand side of this page and you will be taken to our DOT regulations page which has a poster of the required markings for the different types of trailers.

On this page you can purchase 2" x 30' & 150' rolls of the popular 7" white/11" red pattern DOT tape, as well as, solid white rolls. We also have the 7/11 tape in a "kiss cut" version meaning the tape is kiss cut so that you can peel the sections off 18 inches at a time for easier application.


For other sizes and types go to our main DOT tape menu by CLICKING HERE.


On this page we carry the following REFLEXITE V92 tapes for trailers and other applications.

Alternating 7" white / 11" red rolls in 2" Widths.
2" rolls of "Kiss Cut" 7/11 red/white DOT Tape
Solid white/silver rolls in 2" Widths.

dot conspicuity tape


2" X 30' ROLL (7" white/11" red alternating)

($49.99 PLUS SHIPPING) click below:


2" X 150' ROLL (7" white/11" red alternating)

($109.99 PLUS SHIPPING) click below:


dot kiss cut tape


2" X 150' ROLL (7" white/11" red alternating - KISS CUT)

($119.99 PLUS SHIPPING) click below:

(KISS CUT rolls are continuous rolls where the tape has been precut or scored down to the liner. Think of it as 18" pre-cut strips on a roll.)

white dot tape


2" X 30' ROLL ALL WHITE DOT ROLL

($49.99 PLUS SHIPPING) click below:


2" X 150' ROLL ALL WHITE

($119.99 PLUS SHIPPING) click below:



If you wish to order with a check or money order you can send payment along with a description of what you are ordering to

Cole Farms Inc.
1610 Guam Lane
Gulf Breeze, Fl 32563


FOR CUSTOM ORDERS PLEASE CONTACT ME BY e-mail OR CALL STEVE COLE AT
850-934-3157, AND I CAN QUOTE ANYTHING YOU NEED.

reflexite daybright

reflexite diamond plate dot tape

reflexite v92